Back to the Bentley water and wastewater solution
News and Awards | Water Loss Resources
Bentley’s Water Loss Technology
Bentley provides utilities and consulting firms with solutions that let them make the best decisions on controlling water loss, replacing mains, repairing leaks and/or reducing pressure to reduce leakage.
Water Infrastructure Management
Repair or replace? Get the answer to this perpetual dilemma in this eSeminar on asset management. Discover useful tools that help analyze network assets and prioritize capital investments.
Water loss control with Darwin Calibrator
The Darwin Calibrator module, which is included in WaterGEMS and available for WaterCAD, lets modelers leverage flow and pressure data to find locations for more detailed sonic leak detection.
Criticality Analysis with WaterGEMS
Criticality Analysis, included in WaterCAD and WaterGEMS, lets engineers identify those areas to be shut down to repair leaks and those areas that will be impacted if they don't.
Pressure Management with WaterGEMS
Sometimes there are leaks that can’t be found (unavoidable leakage) or be fixed in the near future. In those cases, water professionals can use WaterCAD and WaterGEMS’ Pressure Dependent Demands (PDD) analysis to study the amount that they can expect to reduce leakage by reducing pressure, and look at the impact on customer service.
Pipe breakage control with HAMMER
HAMMER can help engineers reduce pipe breakages caused by high pressure transients (or water hammer), identify the areas where breakage is likely to occur, and design surge protection devices.
Water Leakage: Find - Repair - Reduce - Prevent
This presentation focuses on how water modeling software can help you reduce water loss and answer the following questions:
- Where are the leaks?
- Who will be left out of service during repairs?
- Can we reduce the pressure to minimize leaks?
- How can we protect our system?
News and Awards
Water Predicament: Software review on Bentley’s Darwin Calibrator, (as published in CAD User)
Bentley's Innovative Water-Leakage Modeling Software Address Billion-Dollar-a-Year Problem
Where's the leak? United Utilities aims to cut water wastage with its innovatory research into leakage hotspot prediction, (as published in CAD User)
Project Innovation Award: Bentley and United Utilities Project Wins International Water Association (IWA) Award
Paul Sage (United Utilities) and Zheng Wu (Bentley) receiving the 2008 Europe Honour Award in Applied Research, from IWA
Water Loss Resources
Is Water the New Oil?
An exploding global population, rapid industrial growth in the developing world, and aging water distribution infrastructure are putting unprecedented pressure on our planet’s finite fresh water resources. What can we do to avert an imminent water crisis?
Presentations
- Experiences Using Water Network Analysis Modeling for Leak Localization, by S. Sethaputra*, S. Limanond*, Z. Y. Wu**, P. Thungkanapak***, K. Areekul***
This paper reports initial experiences in using water network analysis and modeling software for leak localization for a DMA in the Metropolitan Bangkok area.
* Technology Service and Consulting 1656 Co., Ltd, Thailand
** Bentley
*** Metropolitan Waterworks Authority of Thailand
- Innovative Optimization Model for Water Distribution Leakage Detection, by Dr. Zheng Yi Wu, Bentley
This paper describes the theory behind the leakage calibration methodology and optimization tool used in WaterCAD and WaterGEMS’ Darwin Calibrator.
- Using Simulation and Optimization Models for Detecting Water Distribution Leakage, by Paul Sage, United Utilities (United Kingdom) - Be Conference 2007
Learn how an optimization-based approach can simultaneously quantify and locate water losses using hydraulic model calibration that is formulated as a nonlinear optimization problem which is solved with a genetic algorithm.
- Use of Hydraulic Model for the Optimization and Losses Reduction Planning –The Passagem Funda Distribution System, by Nivaldo Rodrigues da Costa Jr., SABESP (Brazil)
This work presents the planning for optimization and reduction of water losses in Passagem Funda system, an area with 274 km of pipes and high pressures.
Case Studies
WaterGEMS Powers Design of Breakthrough 24-by-7 Water System in India, Maharashtra Jeevan Pradhikaran (MJP) - Be Award 2008 winner
Learn how MJP reduced Non Revenue Water (NRW) and contamination level. Building a water model to assist in the transformation of an intermittent water supply in a district of Mumbai into a 24/7 solution creates a template for similar infrastructure improvements in the rest of the developing world.
WaterGEMS and HAMMER Help Manila Water to Improve the Reliability and Efficiency of the Antipolo Water Supply System, Manila Water Company - Be Award 2008 finalist
This user story describes how Manila Water Company optimized the Antipolo Water Supply System, by facing many challenges: the limited capacity of the suction line, pressure distribution over rolling terrain, pressure surges as a result of the unreliable power supply, and last but not least, the challenging economic circumstances of people in the areas targeted for expansion.