Bentley.com>社区>Haestad Solutions
 HAESTAD SOLUTIONS

Be Prepared to Respond to Emergencies, with WaterGEMS/WaterCAD and HAMMER
按章节观看此实况在线研讨会：
这些视频将直接在您的媒体播放器中打开。

View the full session (26 min, 34 sec)
(you will be requested to log in to see this video)

 

Overview:

1 - Introduction
2 - Demonstration in HAMMER and WaterGEMS: negative pressures due to transients lead to the entrance of a contaminant in the system.
3 - Demonstration in WaterGEMS: flushing of the contaminated water.
4 - Demonstration in HAMMER: addressing of the surge problem by adding a hydro-pneumatic tank.
5 - Conclusion and Q&A

 
资源：
More water eSeminars (live and recorded)
出品人：    Mike Rosh, Application Engineer, Bentley
摘要：  

Watch how HAMMER and WaterGEMS/WaterCAD can help engineers be more responsive to emergencies and customer complaints.

This video shows the simulation of negative pressure problems and resulting contamination. It also shows the selection of the best operational strategies to address these problems in the short and long terms.
您可以了解到：
  • Integrate your water modeling (WaterGEMS/WaterCAD) and transient analysis (HAMMER) work.
  • Detect the cause of potential problems and simulate their effects in the water system: in this case, an odor problem is reported in a specific region of the water network.
  • Select a short-term solution: in this case, the contaminated water is flushed.
  • Select a long-term solution: in this case, a hydro-pneumatic tank is installed to suppress the transient.
截图：
查看实况在线研讨会时存在问题？  >> 视频帮助

返回 Haestad Solutions 实况在线研讨会名录