Available today as a free upgrade for Bentley SELECT subscribers, WaterCAD users will benefit from dozens of new features that make V8i much faster, powerful, and easier than ever!
Key new features in WaterCAD V8i (SELECTseries 3)
Watch the recorded eSeminar introducing this new version of WaterCAD
UPDATED CAD INTEROPERABILITY
Support for AutoCAD 2012
You can now run WaterCAD within AutoCAD 2012 (32- and 64-bit versions). Please note that an AutoCAD license is required - if you don't have an AutoCAD license, you can choose to run WaterCAD in its stand-alone mode.
HYDRAULICS
- Water quality batch run
- Carbon emission calculation
- Skelebrator support for isolation valves
Key new features in WaterCAD V8i (SELECTseries 2)
Watch the recorded eSeminar introducing this new version of WaterCAD
HYDRAULICS
Combination pump curves enable modelers to analyze interaction of pumps within a station and view graphs of head and efficiency for any combination.
Top Fill Tank: The tank element can now model tanks filled from the top, including a control valve to throttle flow as the tank gets full.
Pipe Renewal Planner is a new module, available for WaterCAD (included in WaterGEMS) as an add-on. Pipe Renewal Planner is a condition assessment tool that helps engineers identify the pipes in water distribution networks that should be considered for replacement or repair. Engineers in water utilities can now integrate pipe scoring and ranking as part of their asset management process.
MODEL BUILDING AND MANAGEMENT
i-model support enables the sharing of results among a wider audience and clash detection using MicroStation or Bentley Navigator (clash detection feature requires additional license )
Formula-based data extensions allow users to create new element properties from existing ones based on formulas.
With seed files, users can save project settings and data as a template.
SCADAConnect enhancements: SCADAConnect can now import field data into the model to visualize on thematic maps. (SCADAConnect is available for WaterCAD as an add-on module and is included with WaterGEMS).
RESULTS VISUALIZATION
Users can now create symbology definitions that store their element symbology preferences for annotation and color coding.
Three new network tracing queries have been added, to trace to the nearest element of a particular type, the nearest upstream element of a particular type, and the nearest downstream element of a particular type.
UPDATED CAD INTEROPERABILITY
WaterCAD can now support the following versions when running within AutoCAD (WaterCAD For AutoCAD license necessary) or MicroStation:
- AutoCAD 2011 (32 bit)
- MicroStation V8i SELECTseries 2)
Prior versions of AutoCAD and MicroStation are also supported.
To run your water model within ArcGIS, check out WaterGEMS (or upgrade your WaterCAD license to WaterGEMS)
DXF layer export allows users to export the model on several layers.
Key new features in WaterCAD V8i (SELECTseries 1)
PRESSURE ZONE MANAGER
The Pressure Zone Manager automates the process of identifying the multiple pressure zones of a water distribution system and their characteristics.
The Flow Balance feature allows users to visualize their model results by pressure zones so that they can easily determine the areas with excessive or insufficient pressures, for example.
ENHANCED SCENARIO COMPARISON
The Scenario Comparison Manager is an excellent way to track scenarios and compare different strategies, especially since differences between scenarios can be subtle.
Modelers can visualize these differences in a detailed table to compare variations in properties from one scenario to another, or directly on the network drawing to easily and quickly identify which elements are different between scenarios.
ADD-ON DARWIN SCHEDULER MODULE
Darwin Scheduler is a new optimization module included in WaterGEMS. Darwin Scheduler helps engineers find the optimal pump scheduling strategy by optimizing your choice of energy use or cost. It handles both variable and constant speed pumps.
Darwin Scheduler is available for WaterCAD for an additional fee, and is included in WaterGEMS.
QUICKER PROFILE CREATION
The enhanced profile creation process allows users to pick each end of the profile path, as opposed to having to pick every pipe along the path. WaterGEMS will automatically select the profile path.It also offers modelers the choice to add waypoints to guide WaterGEMS select the right profile path.
SYSTEM HEAD CURVE FOR CLOSED SYSTEM SUPPORTED
System head curves can now be created for closed systems using a Pressure Dependent Demand alternative, function, and calculation option.
UPDATED CAD INTEROPERABILITY
WaterCAD can now support the following versions when running within AutoCAD (WaterCAD For AutoCAD license necessary) or MicroStation:
- AutoCAD 2010
- MicroStation 08.11.07.163
Prior versions of AutoCAD and MicroStation are also supported.
PERFORMANCE IMPROVEMENTS
- Better performance for large models.
- Faster Genetic Algorithm calculations (Darwin modules)
- Pressure engineer improvement.
Key new features in WaterCAD V8i
Video: Learn what's new in WaterCAD V8i - presented by Dr. Tom Walski.
UPDATED CAD AND INTEROPERABILITY
Support for ProjectWise V8i: Manage WaterCAD files using the ProjectWise project team collaboration system.
Support for MicroStation V8i platform: Run WaterCAD on the MicroStation V8i platform (MicroStation license required - if you don't have any MicroStation license, you can choose to run WaterCAD on its stand-alone platform).
Support for AutoCAD 2009 platform: The WaterCAD for AutoCAD option can be run on the AutoCAD 2009 platform (AutoCAD license required - if you don't have any AutoCAD license, you can choose to run WaterCAD on its stand-alone platform).
IMPROVED MODEL BUILDING
Easier model maintenance with GIS-ID property: The new GIS-ID property can be used for maintaining associations between records in your source file and elements in your model.
ModelBuilder improvements (to create new models or update existing ones from various different data sources)
- Oracle spatial support for ModelBuilder.
- Possibility to import a subset of data using where queries. This allows users to filter the data to import only the information they need, without having to change the data from its original format.
- Automatic creation of selection sets containing model elements that were either added or updated.
- Update the currently selected scenario or create a new child scenario during the data import process. Using a child scenario allows you to see the changes that were made by ModelBuilder during the last model-build operation.
EASIER MODEL MANAGEMENT
Demand Control Center improvements enable users to filter by zone and analyze statistics.
Improved performance on large all-pipe models.
Easily and quickly create a prototype for new element by right-clicking any element in the drawing view and selecting the Create Prototype menu option.
New Merge Nodes in Close Proximity tool to automatically merge duplicate nodes and reconnect conduits.
ENHANCED OPERATION MODELING
Award-winning Darwin Calibrator module for leakage detection (available for WaterCAD for an additional fee and included in WaterGEMS): Engineers can now also use the included module to leverage flow and pressure data to find locations for detailed sonic leak detection.
New air release valve element to more accurately handle pumping over high points.
Flushing simulation to help utilities and municipalities plan, analyze, and optimize flushing programs to control and improve water quality in their water distribution systems. Engineers can optimize flushing programs with multiple conventional and unidirectional flushing (UDF) events in a single run allowing users to filter by zone and analyze statistics.
RESULTS INTERPRETATION
Ability to create Google Earth (KML) files for results display
Key new features in WaterCAD V8 XM?
INTEROPERABILITY AND MODEL BUILDING
New MicroStation platform: Build, edit, run, and visualize your water model leveraging MicroStation's geospatial engineering environment.
LoadBuilder module for demand allocation: Use LoadBuilder directly from WaterCAD's stand-alone interface to allocate demands using geospatial water consumption data sets.
TRex for elevation extraction: Extract elevation information from DEM's, CAD contour files, shapefiles, and spot elevations directly from the stand-alone interface.
Thiessen polygon creator: Automatically create thiessen polygons around your model nodes to support demand assignment (LoadBuilder) methods that require service polygons.
DATA MANAGEMENT
Query-based selection sets: Manage persistent and dynamic element groups using advanced multi-parameter SQL queries.
Network Navigator: A powerful new utility to find and fix network topology and connectivity issues resulting from inconsistent source data.
Enhanced Undo/Redo support: Lay out elements, use FlexTables, and edit data with unlimited confidence with undo/redo support across your entire model.
Copy/Paste support from external sources: The new WaterGEMS V8 grids allow bi-directional Copy/Paste support. Great with spreadsheets and FlexTables!
OPERATIONS MODELING
Criticality analysis: Evaluate the consequence of failure across your entire system, and discover the assets with the highest hydraulic and operational impact.
Pressure-dependent demands: Calculate demands as a function of pressure to effectively model intermittent supply scenarios, sprinkler heads, and water loss.
New isolation valve element: Use this new element to model system segments, perform trace analyses, and find vulnerable infrastructure assets.
New hydrant element: Model hydrants as independent nodes leveraging the new pressure-dependent demands, and fire flow navigator features.
New variable-speed pump battery element: Model complex batteries of variable speed pumps using a single simplified element that correctly models series and parallel installations as a whole.
FIRE FLOW AND DEMAND MANAGEMENT
Fire Flow Navigator: Run system-wide fire flow analyses, and navigate your entire network to evaluate flows, velocities, and pressures for every element.
Hydrants: Model hydrants as independent nodes leveraging the new pressure-dependent demands, and Fire Flow Navigator features.
Demand Control Center: Globally manage simple, composite, and pressure dependent demands across your entire model.
Unit demand engineering libraries: Develop and maintain your own area, count, discharge, or population-based unit demands for quick demand estimation.
MAPPING AND PRESENTATION
Thematic mapping: Use property-based element-sizing, color-coding, and annotation, to easily visualize and map your input data and modeling results.
Background layer manager: A new utility to organize, group, customize, and display DXF, shapefile, BMP, JPEG, TIFF, PNG, GIF, and MrSID backgrounds.
GIS-style symbology: Configure your model to display zoom-dependent symbol sizes that dynamically change while navigating your model.
Advanced contouring: Superimpose unlimited contour maps directly on your system layout, and streamline map production with the new contour definitions.
Back
V8-Powered Water Distribution Modeling
WaterCAD V8 XM Edition advances the water modeling technology standard once again. Read all about it in the Haestad Methods Solutions newsletter, Issue 14. Download PDF
Back
Watch video clips of WaterCAD in action
All-new stand-alone interface:
Discover a fresh, more responsive and functional stand-alone interface. Customize your work environment with dockable dialogs, enjoy extended background image support, powerful thematic mapping features, bi-directional copy/paste from external applications, and much more.
Play video clip: 56 seconds
Geospatial model building modules:
Watch how easy it is to use the new stand-alone LoadBuilder, TRex, and Thiessen Polygon Creator modules. Leverage your geospatial data sets to automatically allocate demands and assign elevations, saving time and avoiding unnecessary data entry errors.
Play video clip: 1 minute, 52 seconds
Pressure-dependent demands
Learn about the new Pressure-Dependent Demands (PDD) feature. Review the necessary input for a PDD analysis, graph and compare scenarios with and without PDD, and realize the benefits of PDD for intermittent supply systems.
Play video clip: 4 minutes, 32 seconds
Back
Download white papers
Using Criticality Analysis to Identify Impact of Valve Location. ASCE 8th Annual International Symposium on Water Distribution System Analysis, Cincinnati (OH), August 2006
Efficient Pressure Dependent Demand Model for Large Water Distribution System Analysis. ASCE 8th Annual International Symposium on Water Distribution System Analysis, Cincinnati (OH), August 2006
Back
Frequently asked questions about WaterCAD
When is WaterCAD V8i going to be available?
WaterCAD V8i is available now! Bentley SELECT subscribers can download the new version right away.
Is the support for the MicroStation interface included?
Yes. The ability to work within the MicroStation platform comes standard with WaterCAD, as well as the classic stand-alone platform. You are able to add the ability to work within AutoCAD integration for an additional fee.
Do I need MicroStation or AutoCAD to run the new WaterCAD?
Only if you want to work within one of those environments. WaterCAD stand-alone doesn't require any additional licenses.
Are the new LoadBuilder and TRex (Terrain Extraction) add-ons for additional price?
No. LoadBuilder and TRex come standard with WaterCAD (since the V8 XM Edition version). You can use them within the stand-alone, MicroStation, or AutoCAD interfaces.
Back