OnDemand eSeminars

New Major AutoPIPE Flange and Underground Piping design modules

Register for this eSeminar now to find out about the two new fully integrated and comprehensive design modules to check reliable flange designs and safely engineer underground piping systems.

Duration: 1 hour

New Major AutoPIPE V8i SELECTseries 3 (v9.4) Features

Register for this eSeminar now to find out about the exciting new Bentley AutoPIPE V8i SELECT series 3 (v9.4) release with more than 70 new features and improved performance.

Duration: 1 hour

Competitive Advantages of AutoPIPE

Presented by Jeannine Fuchs/W.Fuchs who sold and supported CAESAR II for 20 years, this special eSeminar was packed with the ins and outs of AutoPIPE vs CAESAR II and why W.Fuchs GmbH made the switch over to AutoPIPE for their stress analysis software.

Duration: 1 hour

PIPELINK - New STAAD/AutoPIPE Integration

Learn about the new trend in plant design to engineer safer integrated structural and piping models with the new PipeLINK interface, which enables users to save hundreds of man-hours and avoid costly design mistakes. In addition, you’ll see how Metso Minerals used the STAAD/AutoPIPE integration for enhanced design of a Pulverized Coal Firing System.

Duration: 1 hour

CAD Integration

Learn how to transfer any intelligent 3D CAD model to AutoPIPE from popular Plant modeling systems like AutoPLANT, PDS, PDMS, SmartPlant, and PlantSpace, as well as lesser-known systems like CADWorx, SolidWorks, CATIA, and AutoDesk Inventor. This allows accelerated pipe stress designs and improved accuracy.

Duration: 1 hour

Current STAAD AutoPIPE Integration - Part 1

Presented by Mark Upston, Bentley Systems

In this session, you will learn about the new trend in plant design to engineer safer integrated structural and piping models with the new PipeLINK interface, which enables users to save hundreds of man-hours and avoid costly design mistakes. In addition, you’ll see how Metso Minerals used the STAAD/AutoPIPE integration for enhanced design of a Pulverized Coal Firing System.

Duration: 30 minutes

AutoPIPE: Using Bentley Navigator for Hot Clash Detection to Avoid Costly Design and Construction Mistakes

Presented by Mark Upston, Bentley Systems

You'll see in this video how a unique hot-clash detection capability lets you use Bentley Navigator with AutoPIPE to avoid in-service interference conditions.

Duration: 30 minutes

AutoPIPE Nuclear for Safety and Piping Analysis

Presented by Phil Senior

Learn how to take an existing AutoPIPE model and modify it to be suitable for an ASME III Class 1 analysis as well as the following:

• Special ASME III Class 1 geometry considerations, reducers, out of roundness,
  joint types
• Special loading conditions, design and operating conditions, Delta T1, T2 and gross discontinuity, analysis load sets
• Post processing, pre and full verification results, interactive results scan, Class 1 report, fatigue report
• ADLPipe translator for existing Class 1 models

Duration: 1 hour